;
; CNTL/E ==> Stop simulator
; CNTL/C ==> System Stop
; CNTL/Q ==> Inquiry Request
; CNTL/S ==> System Start
; ENTER  ==> Program Start
;
=====================================================
System/3 simulator V3.11-0

5703-XM1 COPYRIGHT IBM CORP. 1970
ENTER CONFIGURE COMMAND OR PRESS PROG START KEY
CONFIGURE 16CK,16K,NOCRT,2D200
ENTER DATE - MM/DD/YY
01/17/22

READY
ASSIGN-WORKAREA R1

FILE ALLOCATION COMPLETED

READY
EDIT DEMO
WORK FILE HAS BEEN CLEARED AND NAMED DEMO

READY
Inquiry Request issued                <CNTL/Q>
Simulation stopped, IAR: 12A8 (B 048D)
sim> r(eset)
sim> go


> CD,DD,VM,CP,DP,DC,DW, H,R,T,M... V
ENTER FIRST LINE #.......... 110
ENTER LAST LINE #........... 910

CD,DD,VM,CP,DP,DC,DW, H,R,T,M...
*            CD = CORE DUMP                                           *
*            DD = DISK DUMP                                           *
*            VM = VIRTUAL MEMORY DUMP                                 *
*            CP = CORE PATCH                                          *
*            DP = DISK PATCH                                          *
*            DC = DISK COMPARE                                        *
*            DW = DISK WRITE                                          *

*            H  = HALT SYSTEM                                         *
*            T  = TRACE CHANGE                                        *
*            R  = RETURN TO OPERATING SYSTEM

See #ZUTMO.asm.ocl for all details.

Notes:
1 - The following char translations are made in the 5406 keyboard
    and printer translation tables:
    ASCII ---> Weighted ---> EBCDIC      Note
               Code
    " (x'22')  x'3B'         " (x'7F')   Used as NOT-EQUAL sign
    ! (x'21')  x'16'         cent (x'4A) CENT used as '!'
    ^ (     )  x'11'         arrow up (

2 - An array defined as DIM A(10) may be referenced from A(1) till A(10)
    A(0) gives error message:
    ERROR 760 AT LINE xxxx SUBSCRIPT OUT OF <ARRAY SIZE LIMIT>

3 - HELP command may be followed with ' term '
    'term' may be any keyword between <....>.
    A free form term or wildcards are not accepted.


READY
HELP 'FILE LIBRARY AREA'
THE FILE LIBRARY AREA IS AN AREA OF A DISK THAT IS DESIGNATED
BY THE <ASSIGN-LIBRARY> UTILITY COMMAND TO CONTAIN <USER
LIBRARIES>, <ONE-STAR LIBRARIES>, AND <TWO-STAR LIBRARIES>. THIS
AREA IS NORMALLY ASSIGNED ON A DISK FOLLOWING SYSTEM GENERATION.
DISIC INITIALIZATION.OR A SYSTEM MAINTENANCE PROLEOURE.

READY
HELP 'ASSIGN-LIBRARY'
THE ASSIGN-LIBRARY COMMAND ALLOCATES SPACE ON A SPECIFIED DISK
FOR A <FILE LIBRARY AREA>. THE DISK IS SPECIFIED BY ITS LOCATION
R1, F1, R2 OR F2 AND <DISK LABEL>. EXAMPLES:


ASSIGN-LIBRARY R1,DISK3
ASSIGN-LIBRARY R2,DISKS,30
ASSIGN-LIBRARY F1,DISK2,30,90


IF THE OPTIONAL 'NUM-TRACK' AND 'TRACK' <PARAMETERS> ARE NOT
SPECIFIED (FIRST EXAMPLE). THE FILE LIBRARY AREA IS PLACED AS
CLOSE AS POSSIBLE TO THE <SYSTEM WORK AREA>, AND 20 TRACKS ARE
RESERVED. THE 'NUM-TRACK' PARAMETER (30) SPECIFIES THE NUMBER
OF TRACKS TO BE RESERVED ON THE SPECIFIED DISK. THE 'TRACK'
PARAMETER (90) SPECIFIES THE BEGINNING <TRACK> ADDRESS FOR THE
FILE LIBRARY AREA. IF 'TRACK' IS NOT SPECIFIED. THE FILE LIBRARY
AREA IS PLACED AS CLOSE AS POSSIBLE TO THE SYSTEM WORK AREA.
FURTHER INFORMATION IS CONTAINED IN THE REFERENCE PUBLICATION,
GC34-0001.

READY
LOGON HENK/VOLR1,NEW

READY
ASSIGN-WORKAREA R1

FILE ALLOCATION COMPLETED

READY
EDIT RLC
WORK FILE HAS BEEN CLEARED AND NAMED RLC

READY
010 REM * DAMPED OSCILLATION IN A SERIES RCL CIRCUIT *
. . . . . .
510 END
SAVE

READY
LISTCAT
RLC

READY
EDIT RLC
  RLC                                COPIED TO WORK FILE
BASIC PROGRAM FILE
038 LINES, 008 DISK UNITS IN FILE. DATE LAST MODIFIED - 01/01/41

READY
OFF